Больше информации по резюме будет доступно после регистрации
ЗарегистрироватьсяWas online more than two weeks ago
Candidate
Male, 39 years, born on 22 October 1985
Not looking for a job
Yekaterinburg, willing to relocate, prepared for business trips
Quality control, welding inspector, piping supervisor
Specializations:
- Other
Employment: full time, project work
Work schedule: full day, shift schedule, flexible schedule, remote working, rotation based work
Work experience 16 years 10 months
May 2019 — currently
6 years 3 months
CASALE PROJECT JSC (Czech Republic) CASALE PROJECT JSC Branch Office in Perm city
Perm Krai, www.casaleproject.cz
Construction, Real Estate, Architecture... Show more
Welding inspector
- Welding quality control.
- Work on the admission of welders to the facility
- Check and review NDT (Non-destructive tests) reports (include RT films).
- Follow Up and review sub-contractors Welding Procedure Specification (WPS).
- Monitor the implementation of welding works and control compliance with the welding process and assembly.
- Supervise the quality of defects elimination by the contractors within the period established by the commission.
July 2018 — May 2019
11 months
Tecnimont Russia
Moscow, www.mairetecnimont.com
Construction, Real Estate, Architecture... Show more
Piping welding and NDT inspector
To verify that non-destructive test have been correctly performed according to welding procedure qualifications, welds and heat treatment specifications.
- To supervise welding procedure qualifications to be employed at Site and the qualifications of the welds operating within the plant, according to Project specifications and standards.
- To check that Field welds comply Project specifications.
- To check the execution of non-destructive test and heat treatment; that all repairs are performed correctly and non-destructive test are regularly repeated.
- To keep a report file for all non-destructive test and heat treatment performed.
April 2016 — July 2018
2 years 4 months
Russian Branch "South Tamdey LNG"
Yamalo-Nenets AO
Welding and piping Inspector
- Welding quality control in accordance with standards and welding procedure on hazardous industrial objects: ASME, API, ITP (test pressure procedure), GOST, SNiP, Branch Construction Norms (BCN), Safety Rules.
* Chemical, oil-chemical, oil-refining and inflammable equipment;
* Chemical, oil-chemical, oil-refining equipment operating under pressure higher than 16 MPa;
* Chemical, oil-chemical, oil-refining equipment operating under vacuum;
* Tanks for the storage of explosive and toxic substances;
* Compressor and pumping equipment.
- Control on welders’ attestation in accordance with non-destructive standards, WPS (welder performance qualification),
- Welding qualification test and approval of welding procedure.
- Check of As-Built and Permitting documentation for welding, non-destructive and destructive control
- Preparation of Welding Procedure Specification
- Confirmation of executed wilding jobs quality.
- Approval of NDT Laboratories.
- Check realization of NDT, RT films, decoding of RT films, signing NDT acts.
- Check welding equipment on all stages of operation performance – (Positive material identification, X-MET8000) in accordance to the project and specification.
- Check pipeline preparation and as-build documentation during pressure tests.
- Incoming control of pipeline and equipment together with subcontractor and company representative from as-built department.
- Punch list compiling during incoming control if required (in case of investigated defects).
- Punch list issuance on quality of pipeline.
- Check priority of pipeline assembling into pipe rack trestle.
- Reveal and remove discrepancies found out during work performance.
- Check of welding material and consumables as per project requirement and NPD specifications.
- Daily reporting on welding jobs, equipment and pipe rack assembly.
- Weakly briefings (TBT) conduction with subcontracting companies on quality of welding performance
- Observance of HSE rules fulfillment and management notification on possible risks.
- Suggesting solutions of problems, related to quality control organization.
July 2015 — April 2016
10 months
Russian Branch "South Tamdey LNG"
Yamalo-Nenets AO
Construction, Real Estate, Architecture... Show more
Civil and Steel Structure Inspector
- Incoming control on accordance of materials and equipment quality with technical passports, standards and procedures.
- Procedures developing for incoming control
- Incoming control of technical and as build documentation.
- Prepare and sign acts for incoming control.
- Approval of project documentation modification with Field Engineering department.
- Consistent welding and construction control in accordance to project requirements and specifications.
- Management notification on discrepancies and changes of the project.
- Daily and weekly reports issuance and submitting to management.
- Approval of quality and performed scope of work by subcontracting company
- Check as-built documentation for the whole period of construction in regard to welding, construction and pressure tests.
- Acceptance of completed construction and installation activities.
- Punch lists compiling.
- Control of corrective actions fulfillment until fully eliminated.
- Check of welding materials
- Check of welding material and consumables as per project requirement and NPD specifications.
- Weakly briefings (TBT) conduction with subcontracting companies on quality of welding performance.
- Control of welding quality and priority of assembly as per requirements of the project.
- Reveal and remove discrepancies found out during work performance, preventive measures and corrective actions for defects elimination
- Coordinate and agree projects changes with the Client and Field Engineering department.
- Observance of HSE rules fulfillment and timely notification on violation on order to prevent stop of service.
- Action in decide problem belong quality organization.
- Control of HSE requirements and safe labour conditions.
October 2011 — July 2015
3 years 10 months
CJSC "Service Gasification"
Yamalo-Nenets AO, sgaz.pro
Construction, Real Estate, Architecture... Show more
Quality control engineer – I category
- Welding and construction control as per project requirements and specifications.
- Control of as-build documentation availability and preparation.
- Construction works supervision (welding, construction of tanks, steel structure, engine (compressors), civil work) on work site.
- Inform management about discrepancies and project changes.
- Inform management about possible risks and hazards on worksite.
- Daily reports preparations and issuance.
- Check of as-built documentation.
- Ensuring that as-built documentation is in place and properly followed up.
- Check compliance with the scope and work execution dates.
- Check of work schedule and acceptance of completed works; sign estimates and KS-forms.
- Technical control of industrial safety condition, labor safety and environment.
- Quality control of nondestructive testing of contractor's laboratories
- Duplicate inspection control (visual and measuring control, RT, UT)
Projects:
04.2014 - 06.2015 LLC “NOVATEK TARKOSALENEFTEGAS”. Objects of capital construc¬tion; "The East-Tarkosalinskoye field. The oil industry. The southern part. The treatment fa¬cilities. «Booster pump station site preliminary water», «Booster compressor station». The implementation of building control with application of methods of non-destructive testing.
12.2013 - 03.2014 Technip, LLC “RusVinyl”. The Complex for production of PVC with a capacity of 330 thousand tons per year, located as per the following address: Nizhny Novgorod, Kstovo, industrial area. The acquisition, validation and acceptance of as-built documentation in accordance with regulatory and technical documentation for construction.
08.2013 - 11.2013 LLC PTC "Prof gas", "Construction of distribution medium pressure gas pipeline on the territory of the Industrial Park "PRO-BUSINESS PARK", located in Ekaterinburg, Chkalovsky district, and the settlement of the Field". Construction supervision.
06.2013 - 08.2013 LLC "Geostroy". "Fabrication of steel structures for the construction of production facilities." Implementation of production and quality control of steel production. Pervouralsk
12.2012 - 04.2013 LLC "Supertangas", "Purovsky plant - South Balyk main pumping station on site: North-North (YNAO 0-307), North-South (KHMAO 0-70), length cm. The section from 168-253 km, Muravlenko
09.2012 - 12.2012 LLC "Gazprom transgaz Yugorsk", "overhaul. The connection of the compressor unit. Yamburg-Tula 1. KS Novo-Ivdel" COP-3. Inv. No. 133799 (reisolation circuits).
04.2012 - 06.2012 LLC "Gazprom transgaz Yugorsk", "overhaul. The connection of the COP. "Urengoy-Novopskov" KS Ivdel CZ-5 Ivdel LPU MG. Inv. # 131431(reisolation circuits)".
11.2011 - 12.2011. CJSC Achimgaz", "Pipeline section 1A Achimov deposits of the Urengoy field in Western Siberia second (backup) line". Novy Urengoy
August 2008 — July 2011
3 years
CJSC “Gazmontazh” Non-destructive testing laboratory
Sverdlovsk Oblast, gasmontazh.ru
Construction, Real Estate, Architecture... Show more
Non-destructive testing operator, 5 category
Quality control of welded joints by non-destructive methods (visual and measuring control, x-ray control)
Issuance if reports
A-built documentation preparation
Keeping records of material expenditures
Preparation of technical and as-built documentation, drawings, diagrams.
Process flow charts preparation for NDT.
Projects:
Construction and gasification of settlements, industrial facilities, power plants
Skills
Skill proficiency levels
Driving experience
Own car
Driver's license category B, CAbout me
Sport, traveler, english, swiming
Higher education
2011
mining engineering department, Applied Mechanics
Languages
Professional development, courses
2020
NOPRIZ
National Register of Engineering Specialists surveys and architectural and construction design, Identification number of the specialist П-123645
2019
NAKS "Specialist welding fabrication" 3-level. Number: СУР-1ГАЦ-lll-00664, valid to 06.2024
Urall Centr Attestation, Oil and gas production, Equipment chemical, oil-chemical, oil-processing, explosion fire-risk production, Building construction
2019
NOSTROY
Russian National Register of Construction Specialists, Identification number of the specialist С-66-177010
2018
Specialist NDT control 2 level. valid to 06.2024
NC Lider, The operator (visual and measuring control, dimention penetration control, ultrasonic control, x-ray control) objects: 6, 8, 11
2012
Specialist NDT control 2 level
JSC "STC "Welding and control", Engineer quality control 1 category (visual and measuring control, x-ray control, ultrasonic control) objects: 6, 8, 11
2009
Specialist NDT control 2 level
Ural Centre Certification, The operator (visual and measuring control, x-ray control)
Citizenship, travel time to work
Citizenship: Russia
Permission to work: Russia
Desired travel time to work: Doesn't matter